Intelligent bright two-color liquid level gauge

• 

Intelligent bright two-color liquid level gauge is made of high quality stainless steel and imported…

Productoverview:

ZW-ZDS series Intelligent bright two-color liquid level gauge Made of high quality stainless steel and imported electronic components manufacturing display part adopts high brightness LED dual color LED display device, composed of columnar, red and green light through changes in LED to detect the liquid level height; high display brightness, visual distance, clear display angle, scale, product more series, intelligent. The whole process measurement rainlightning protection, corrosion proof, resistant to high temperature, high pressure, high sealing and anti leakage, no blind spots, striking display, intuitive readings, and the measurement range of Lei, applicable to all kinds of tower and tank spherical medium level measuring device and boiler equipment etc.. Matching the limit switch can achieve the level of upper and lower limit of alarm and control; matching the level transmitter, the liquid level signal into 4 ~ 20mADC analog signal is not accurate, remote detection, indication, record and control, and direct communication computer system.

Two, work principle:

ZW-ZDS series of <strong> intelligent high double color level meter</strong> according to the principle of buoyancy and magnetic coupling principle. When measured in the container level lift, liquid level gauge leading tube float will lift, float within the magnet with a transfer to the scene display * box of high precision electronic sensor through magnetic coupling, triggering the corresponding digital circuit, the LED double color LED color conversion, no red liquid, liquid filled all green, red and green at the junction of the actual level is within the container, so as to achieve the level of the scene at a glance; installation instructions, limit switch to achieve level alarm and control, with the transmitter digital signal output for display and control.

Three, application:

ZW-ZDS series <strong> intelligent bright two-color liquid level gauge</strong> with limit switch, can achieve the level of upper and lower limit of alarm and control; selection of liquid level transmitter, the liquid level can be 4 ~ 20mADC analog signal into standard signal, realize remote detection, indication, record and control, and computer system for direct communication. This series of products are widely used in electric power, metallurgy, petroleum, chemical industry, environmental protection, marine, building and other industries in the production process, level measurement and control of various tower, tank and boiler equipment.

Four, main features:

1, simple design. Compact. Strong and reliable. Long life. No maintenance, can long indoors. Installation:

2, a unique scene. Remote integrated structure, the industrial automation management becomes more easy and convenient;

3, a unique electronic luminous double color display, suitable for the application in the light dark places, night observation more eye-catching;

4, the unique imported mist astigmatism LED LED display effect, strong penetrability, clear bright, clear for industrial remote monitoring;

5, measurement display part, and the liquid level transmitter, the alarm switch in voltage, resistance completely isolated;

6, working pressure range, pressure from vacuum to 42MPa; corrosion resistance <2.5MPa;

7, wide working temperature range, suitable for -160~+530 from c;

8, widely used in strong corrosive, flammable, toxic, strong radiation, agitation, dirty liquid level measurement;

9, you can choose various types of magnetic limit switch, realize the liquid level automatic control or alarm;

10, you can choose various types of 4~20mADC liquid level transmitter, realize remote centralized measurement and control.

Five, technical parameters:

1, installation: vertical (Zui large deviation is less than 30);

2, measurement range: 0-150-6000mm (more than 6000mm orders can be negotiated);

3, medium density: 0.4-2.0g/cm3;

4, working temperature: -160 to 530 DEG c;

5, follow the speed: less than 0.08m/s;

6, float material: 304 PTFE/304, PTFE, aluminum, titanium lining;

7, LED display: low light, bright, light fog types are optional;

8, the leading tube: 304; 1Cr18Ni9Ti; 316L; 304 liner PTFE; titanium; PP; PTFE (PTFE);

9, flange: DN15 ~ DN50 (HG20592-97 flange standard), high pressure type side mounted gauge connection flange standard by HG20595-97 hot welding;

10, flange material: carbon steel, 304, 316L.

Six, other parameters:

1, the power supply voltage: DC24V, AC36V, AC220V;

2, the accuracy is not less than 10mm;

3, working pressure: -0.1 ~ 42 MPa;

4, the environmental vibration frequency is less than or equal to 25Hz amplitude less than 0.5mm;

Medium viscosity: less than 0.4Pa.S;

5, valve: stainless steel ball valve, needle valve;

6, the leading tube diameter: Phi 48, Phi 57, Phi 62mm.

Seven, the top choice of additional functions:

Liquid level transmitter：

Output current: 4 ~ 20Madc (wire)

Resolution: 1cm + load resistance: 500 ohm (24VDC power supply)

Transmission distance: >3000m power supply: 12 ~ 36VDC

Intelligent liquid level transmitter:

Output type: connect RS485 data output and a 4 ~ 20mADC arbitrary

Resolution: 0.1%F.S load resistance: 0 ~ 36VDC

Eight, insulation:

Vacuum jacketed pipe is led by adding a layer of vacuum tube in the liquid level, so that the measured medium and external insulation.

Double jacket, generally refers to a hot steam jacket to do a layer of vacuum jacket.

Electric heating system, is leading tube level in the winding electric tracing band to the heating medium.

Nine, the installation position:

Double color level meter display parts of the installation position can be arbitrarily changed:

1, on the left side of the installation;

2, the left 600 installation;

3, the standard installation;

4, on the right side of the 600 installation;

5, installed on the right side.

Ten, installation and use:

1, the hydraulic pressure gauge and container flange flange clip gasket connection, tighten the bolts.

2, sewage, into the open flange sensor float. Note: end to float magnet, can not be inverted.

In 3, the sensor discharge flanges under the installation of a DN15 valve, and the liquid level meter of sewage pipe.

4, communication power, input AC36V power (or diameter is inserted into the AC220V power supply), the liquid level meter to facilitate observation range.

5, first open the valve, and then slowly open the valve, especially in high pressure situations of the liquid level gauge, pressure slowly into the contest, to prevent damage to the medium pressure float suddenly, slowly into the sensor, liquid level observation shows that the conversion from red to green one by one.

6, sewage, water, observe the water level display, high and low water level alarm is normal, if there is no abnormal phenomenon, can be put into use.

11, encoding selection:

12, design selection and ordering information:

1, specifications; ZW-ZDS series double color liquid level gauge;

2, the measured medium Name: medium density;

3, the instrument measuring range: also known as nominal length;

4, working pressure: pressure;

Working temperature: 5, the lowest and the highest temperature measurement of liquid;

6, material requirements: wetted materials;

7, supporting the supply of flanges, bolts and nuts, valve, sealing washers and other accessories;

8, standard: flange flange nominal diameter of the flange, using DN20 or DN25;

9, special requirements: please indicate in detail before ordering, such as whether or not to take remote etc..

Customer service service commitment:

1, our level meter series products quality problems within twelve months, responsible for free maintenance.

2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.

3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.

4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.

5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.